found drama

get oblique

Homebrew #28: Honestatis (Mk. V)

by Rob Friesel

When 14th Star announced that they were going to sponsor the third Make the Cut challenge in 2017, I knew immediately that I wanted to enter, and I knew immediately what beer I was going to enter. After all, if I wasn’t fond of this recipe, then why would I have brewed it four previous times? ^^See also: Honestatis, Mk. II, Mk. III, and Mk. IV.^^^ So, with pride, I entered my house favorite: Honestatis:

Honestatis Mk. V

With that most important choice out of the way, I pondered what tweaks to the formulation would be necessary to go all-grain. ^^Single-vessel brew-in-a-bag qualifies as all-grain as long you’re not adding extract, right?^^^ I’d described batch #4 as “very close to perfect” and so I didn’t want to mess with it too much; on the other hand, it was also a partial mash batch where 27% of the fermentable sugars had come from a can of Briess Munich LME. How was I going to make up for that? Would a 1:1 percentage-wise replacement be good enough? Given that I’d recently recalculated my brewhouse efficiency, did I trust my extraction rates? Did I know enough about my water chemistry?

I hadn’t even bought any ingredients yet and already I was feeling in over my head!

Taking a deep breath, I reminded myself that it was best not to over-think anything. Keep it simple. A made couple of decisions:

  1. Lock in on a 3 gallon all-grain BIAB formulation.
  2. Keep that grist looking as similar to the last batch as possible but…
  3. Drop the percentage of crystal malts slightly and make up the difference with rye.
  4. And (indeed) do a 1:1 replacement of the Munich LME with Munich malt.
  5. Scale your hops accordingly and make it sing.

With the tweaks made, I committed to the formulation in BeerSmith and printed it out. I was ready as I was going to be.

Brew Day

Right from the start, a challenge emerged and I had to think on my feet. I filled my kettle with the 17.66 quarts of strike water that BeerSmith calculated for the “BIAB, Light Body” mash profile. Except that 17.66 quarts is just over 4.4 gallons in a 5 gallon kettle. And that’s before any of the 9.8 pounds of grains are added. Thinking back to Gordon Strong’s suggestions on the matter, I jumped back into BeerSmith and changed to a Single Infusion Mash profile. By default, BeerSmith uses 1.25 quarts per pound, but Strong’s recommendation is for a 1.5 qt./lb. ratio; I went with Strong’s recommendation and although it was a very full kettle, I managed to dough in and get through my 148°F 75 minute mash without overflow or incident.

Honestatis Mk. V Brew Day

I skipped the mash-out. I “pseudo-sparged” by rinsing the grain bag with a gallon of approx. 160°F water and using that to top-up the kettle to 3.7 gallon boil volume.

Honestatis Mk. V Brew Day

Brought the wort up to boiling and followed along with my hop schedule. Chilled it. Transferred to the carboy. Took some gravity readings (1.073). Aerated. Rehydrated some US-05 and pitched at 70°F. Took it down to the fermentation chamber to let the yeast work at 68°F and… we wait.

Fermentation

The lag time felt a little long (about 28 hours to see any activity ^^It’s worth calling out here that it’s possible that my temperature controller, an Inkbird ITC-308S, despite being able to use a 1°F margin around the set point, has a flaw that doesn’t allow it to maintain such a narrow margin. I had tried to lock in the controller at 68°F with a ±1°F margin. However, despite hitting 68°F rather quickly, I observed the temperature reading from the probe get into the low 60s. Of course it’s also possible that the controller cut the power to the freezer but by that point, without a heating element to counteract it, the insulated chamber just meant the liquid’s temperature was going to crash that much more.^^^) — but once it got going, I stopped fretting. And by the time we were at +41 hours from pitching, the krausen was rocking and rolling rather vigorously.

Honestatis Mk. V

After six days, I hit it with a little bit of yeast energizer to help that gravity find its way down. Let it condition for another eleven days, taking gravity readings at 11, 14, 16, and 17 days post-pitch. When the gravity reached a stable 1.013, I fined with gelatin and cold-crashed it.

I primed with corn sugar and got a yield of 23 × 12 oz. bottles. Set it up in a warm, quiet closet and did some more waiting.

Honestatis: packaged

My Impressions

I tested the first one from this batch on January 6th:

Honestatis (Mk. V)

My Untappd comment reads:

First from batch #5. I’ll be proud to send this one on to Make the Cut. Smoky and rye spicy. Great.

My brewing journal gets a little more critical and specific though:

  • cherrywood smoke malt seems a little too strong…?
  • (c/w/ all the partial mash batches it always seemed not strong enough)
  • qty. rye seems good — could use more?
  • little more carbonation should help w/ delivery too
  • BIGGEST DISAPPOINTMENT: not red enough!

These are, I think, fair criticisms. After all, if you’re going for the big prize, you want to bring your absolute best. But as the saying goes, you must go to war competition with the army beer you have.

That said, there were still about 3 weeks until that competition. Theoretically I could try to tweak the recipe and brew it again but… that wouldn’t allow enough time for the bottle conditioning; and while I might be able to force carbonate it in time, then that’s another piece of equipment to… “invest in”.

Between that first bottle and the competition drop-off, I sampled the beer a few more times. ^^Here (where carbonation seemed great, and pictured at the beginning of this post), here (which strangely seemed a lot less carbonated), here, and here.^^^ I also shared a couple with some friends for preliminary feedback. Reviews were positive (when aren’t they?); the smoke was definitely commented upon (“quite rauchbiery”). ^^A week after the competition, I shared one with a friend who had been one of the judges. Up to that point, he knew I’d entered, but not what I’d entered. He hadn’t been at “my beer’s table”, so he hadn’t had it yet. His initial impressions were positive: mild but definite smoke, assertive rye, balanced bitterness. However, his opinion also went from “good” to “very good” after learning the ABV. “That provides a little more context,” he said, “and tells me a few more things about the balance.”^^^

The score so far? I like it. Friends like it. It’s notably smoky, which is what I was going for — though maybe I went too far? But screw it. I’m standing behind my beer and driving it up to St. Albans for judging.

Competition and Judges’ Feedback

I’ll post a summary of the judges’ feedback when it arrives in the mail. That being said, my beer did not advance beyond that first round of judging.

UPDATE 2/11/2016: The judges’ feedback came in the mail this afternoon! As I’d originally written in this section of this post (vide supra), my beer didn’t advance past the first round. I presume it was a tough table because the feedback seemed pretty good overall, though there were also some useful critical notes. I won’t list it all out here, but some of the highlights included:

  • Smoky, industrial flavor. Full of body.
  • Good for pairing w/ cheeses
  • Good balance. Solid.
  • Smoke is heavy, but I like smoke.
  • Very distinct and smokey

So yeah… Judges were getting the smoke, and a few commented on the rye. Almost all commented on the mouthfeel being “full” or “mouth coating” to some degree; this suggests to me that it didn’t attenuate enough, but then again maybe it works better that way? There was some conflicting feedback (e.g., “good carbonation” vs. “not enough […] carbonation”), and it was curious that two judges commented on the “peat”. ^^I presume that “smoke” just gives a “peat” impression to some people? Unless Briess isn’t telling us something, the cherrywood smoked malt hasn’t been anywhere near peat.^^^ The most critical comment was:

Good beer but not remarkable. Wouldn’t have a 2nd at a bar.

Suggesting (to me at least) that they’d at least try it for the novelty. I can live with that.

Conclusion

This being my signature beer ^^And/or house beer.^^^ — I’ll definitely be brewing it again. Even without the judges’ feedback, I’d foresee the need to make a few tweaks.

First: I would boost the hops. In this formulation, I’d cut back a little bit; previous batches were perhaps over-hopped, but I hadn’t thought that I’d cut back here by that much. Did I unwittingly back myself into a chicken-and-egg problem? Did the smoke and the malt sweetness need more bitterness to balance it? I suspect so, and I’ll need to better compensate for this next time.

Second: regardless of how much hops are added back in there, the cherrywood smoked malt needs its proportion cut back a little. Perhaps 7.5% instead of 10%? Though even as I write this, I’m second-guessing that choice. Given one friend’s response, I’m beginning to believe that the smoke is in balance for a 7.9% beer, but it also needs a little longer to mature. And that’s even before considering the interaction effect of boosting the hops.

Third: boost the rye — possibly even a lot. (“You can never have too much rye.”) It isn’t so much that I want it to be extreme, but it seems to me that more of the spicy bite could help. The smoked malt should be in service of the rye.

Fourth: look again at my grist and see what tweaks I can make there to get more of a distinctly red color in the beer. As is, this Honestatis formulation is solidly in the amber/copper range but I could see how someone might think it’s a brown. ^^This isn’t exactly a new problem. I feel like a truly red color is hard to get, and I know of at least one local commercial example where this happened.^^^

Lastly: maybe I need to look at yeast strains other than US-05. The Mk. III batch was made with Wyeast’s 1056 and gave serviceable results — but allegedly, that’s also basically the same strain. Some of my favorite homebrews have been made with 1272 and 1332, both of which Wyeast suggests as a good fit for this style. This seems like it could potentially be a big shake-up but perhaps that’s the shot-in-the-arm that this beer needs?

(And all this even before I’ve considered the judges’ feedback!)

Am I bummed that I didn’t advance? Of course I am. Am I proud of this beer? You better believe it. Would I brew it again? You’re goddamn right I will.

Recipe

The all-grain (BIAB) recipe for Honestatis (Mk. V) is as follows.

Mash Grains

  • 3 lb. 8 oz. Briess rye malt
  • 2 lb. 8 oz. BestMälz Munich malt
  • 2 lb. 8 oz. Briess Pale Ale malt
  • 1 lb. Briess cherrywood smoked malt
  • 3 oz. Briess 40L caramel malt
  • 2 oz. PQM Crystal 250

Hop Schedule

  • ¼ oz. Galena (60 min.)
  • ½ oz. Columbus (10 min.)
  • 1 oz. Willamette (whirlpool 5 min.)

Yeast

Fermentis Safale US-05

Brew Day

  1. Collect 14.7 qt. water and heat to 158.4°F. Mash in; hold at 148°F for 75 minutes. No mash out.
  2. Remove filter bag from water. Squeeze filter bag to extract as much liquid as possible for wort.
  3. Sparge with 1.2 gallons of water. Pre-boil volume should be 3.7 gallons.
  4. Bring to a boil. Boil for 75 minutes; follow hop schedule described above.
  5. Cool to 70°F (or below) as rapidly as possible; top-off as necessary to reach 3 gallons.
  6. Aerate wort; rehydrate and pitch US-05 yeast.
  7. Place in fermentation chamber and ferment at 67°F.

Beyond Brew Day

  1. Allow fermentation to complete (approx. 2 weeks) at approx. 68°F.
  2. After reaching terminal gravity, consider cold crashing for 1-2 days before packaging.
  3. Use corn sugar to carbonate on bottling day. Rack beer into bottling bucket and bottle. ^^Honestly, I’d rather be kegging — but kegs are occupied, and I need this in bottles for competition anyway.^^^
  4. Allow at least 2 weeks to carbonate.
  5. Enjoy.

Details

Honestatis (Mk. V), an extra amber ale by Tilde Gravitywerks

Original Gravity 1.073
Final Gravity 1.013
ABV 7.9%
Attenuation 81.1%
IBU 38
SRM 15
Links Untappd
Flickr

About Rob Friesel

Software engineer by day. Science fiction writer by night. Weekend homebrewer, beer educator at Black Flannel, and Certified Cicerone. Author of The PhantomJS Cookbook and a short story in Please Do Not Remove. View all posts by Rob Friesel →

3 Responses to Homebrew #28: Honestatis (Mk. V)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

*