I’ve got a soft spot for amber beers. My first homebrew was an American Amber Ale (née red ale). It morphed into Honestatis, which I’ve brewed eight times (with multiple variations). And of course we can’t forget Sirius Moonlight (and Mk. II!) and Le Rousse.
So when we were doing our BJCP study group, and I started to learn how hard it was to come by most of the Czech styles around here, I thought that I might brew one. Well, that session came and went without such a homebrew, but the plan didn’t die. So I committed to brewing one in 2019, and in fact made it my first of the year — Half Dark, a Czech Amber Lager:
I worked through probably three or four different versions of this recipe, starting all the way back in June of 2017. But by the time mid-January 2019 rolled around, it was hard to tell which ideas had come from where. I threw them all out and started over. Shooting for about 15 SRM and a 1.055 O.G., I painted with broad strokes: 60% pilsner malt, then 20% each of a dark Munich and melanoidin.
With all this plugged into BeerSmith, I compared my notes against a few other recipes. It turned out to be pretty similar to the one Josh Weikert included on Craft Beer & Brewing; his had a little caramel malt and so… I added that in and was ready to go.
I staged my gear and collected water the night before, so that I could get to brewing bright and early the next day. Milled my grains and got the flame going for the strike water. I mashed in at 153.5ºF — just a little bit above my target, but not enough to sweat it. Mash pH was 5.46, and I held it for 75 minutes.
I added my first wort hops — including a small and impromptu addition of Sterling to cover the IBU gap — and took a pre-boil gravity reading. I was starting at 1.044, which was slightly shy of the estimated 1.046. Not a huge difference, but enough to make me do some quick math in BeerSmith. I’d planned a 60 minute boil, but decided to extend it to 75 minutes.
When all was said and done, I had 5.5 gallons of 1.055 wort in the kettle, and ran off 5.25 gallons of it into my fermentor.
Chilling alone got the beer down to somewhere in the 65-70ºF range. I got the brew bucket into my fermentation chamber and within about 3 hours it was down to 52ºF — right where I needed it to be for pitching.
I pitched the full volume of my starter when the wort was 52ºF, and set the controller on the chamber to 52±2ºF. That held it steady for several days, and I took the first sample for gravity at +114 hours. I sighted 8.8ºBx on the refractometer, which BeerSmith converted to 1.023.
The next day, at +137 hours, I started ramping up the temperature to encourage complete attenuation and perform a diacetyl rest. I brought up the temperature +5ºF every 12 hours until I hit 66±2ºF. I held it there for three days before taking another gravity reading — 7.2ºBx which BeerSmith converted to 1.012.1 Flavors were developing nicely — still young, but no significant diacetyl — so I began the ramp down: -5ºF every 12 hours.
After spending three days at 35±2ºF, I decided it was time to keg the beer and harvest the yeast. I took a sample for gravity (hydrometer reading was 1.014 after temperature calibration), and mixed up a gelatin solution that I added to the keg. Then I ran off a very complete 5 gallons into that keg.2 I purged the headspace with CO₂ and put the beer on-gas at 12 PSI.
Meanwhile, I harvested the yeast cake so that I could re-pitch it into my next beer (a Munich Dunkel) a couple days later.
“What about lagering?” If I followed the advice from the Noonan book, I would need to lager this beer for 7 weeks given the 1.055 O.G. That would mean I could start serving it at the end of March.
Instead, my impatience got the better of me in mid-February. I took a small sample and it tasted fine. I said to myself oh just sit tight — but that was foolishness. Why sit on perfectly good, drinkable, delicious beer? I BeerGunned a few bottles for competition, and put it on draft.
AROMA. Malt-forward; a lightly toasted bread character at medium intensity. Moderate notes of caramel. Low floral hop impression. No detectable DMS, nor diacetyl. Background notes of dark fruit like black raspberries; it’s subtle and not in every whiff, but it’s there. Also a fleeting impression of vanilla?
APPEARANCE. Burnished copper color with some deep gold highlights. Excellent clarity, but falls short of brilliant. Dense foam with a light khaki color and excellent persistence. Fair number of tiny, fast-rising bubbles.
FLAVOR. Malt forward again; flavors largely follows aromas. Medium intensity toasted bread; significant Maillard products. Moderate notes of a light-colored caramel, especially in the mid-palate. Impression of sweetness in the finish, but decidedly dry. Firm, medium bitterness. Hop flavor impressions at medium-low; spicy on the palate, while retronasal impressions swing to floral or herbal. Black raspberry ester character from the aroma is almost absent here; hints of it retronasally but otherwise undetectable. Fairly even balance, giving over slightly to bitterness. Aftertaste is a mix of light caramel and bitterness.
MOUTHFEEL. Medium body. Medium-low carbonation with some bite that seems to accentuate the hop character. Light impression of creaminess. No significant astringency. No significant alcohol warming.
OVERALL IMPRESSION.5 Matching my impressions to the style guide descriptions: very good (maybe excellent?) example of style. Medium-bodied amber beer characterized by bitterness that plays off some sweet caramel notes. Dry finish enhances drinkability. My criticisms are probably mostly stylistic nit-picks? Lager longer for a more brilliant clarity? The beer is very drinkable but lacks some complexity. Dial back bitterness slightly so it’s not out-competing the malt character. Maybe slightly over-carbonated? Maybe consider softer water to smooth out some of the mouthfeel?
The all-grain (BIAB) recipe for Half Dark is as follows:
Starting with the Champlain Water District profile as a base; carbon filter the water and dose with… nothing. Just a little 88% lactic acid to adjust mash pH.
- 6 lb. 8 oz. BEST Pilsen malt
- 2 lb. BEST Melanoidin malt
- 2 lb. BEST Munich Dark malt
- 8 oz. Briess Caramel 90 malt
- 1 oz. Saaz (FWH)
- 0.5 oz. Sterling (FWH)6
- 1 oz. Saaz (60 min.)
- 1 oz. Saaz (0 min.)
Wyeast 2278 Czech Pilsner Lager (2 packages into a 1800 ml starter)
- Collect 19.14 qt. water and heat to 163.4°F. Mash in; hold at 152.1°F for 75 minutes. Mash out with a 10 qt. infusion of boiling water.
- Remove filter bag from water. Squeeze filter bag to extract as much liquid as possible for wort. No sparge. Pre-boil volume should be 6.48 gallons.
- Bring to a boil. Boil for 60 minutes; follow hop schedule as described above.
- Cool to 52°F as rapidly as possible. Post-boil volume should be approx. 5.25 gallons.
- Aerate wort; pitch 2278 yeast from starter.
- Start fermentation at 52°F.
Beyond Brew Day
- Starting at 52±2°F, allow fermentation to continue until approximately 50% of expected attenuation has completed.
- Ramp up temperature +5ºF every 12 hours until reaching 66±2ºF for a diacetyl rest. Hold there until reaching F.G., at least three days.
- Bring down temperature -5ºF every 12 hours until reaching 35±2ºF. Optionally fine with gelatin under 40ºF.
- Rack to a keg and force carbonate to approx. 2.5 vols (12-13 PSI should do it).
- Consider lagering 5-7 days per 2ºP (35-49 days); or go ahead and drink it if it’s looking and tasting fine.
Half Dark, a Czech Amber Lager by Tilde Gravitywerks
- This is the part where I remark on being skeptical of refractometer readings. The instrument is close enough for these small mid-fermentation readings, but it also always seems to be off by a couple points. Caveat emptor &c. [↩]
- I say “very complete” because the beer all but overflowed the keg. I needed to siphon some out so that it didn’t cover the gas-in dip tube. [↩]
- And Untappd folds this category into some arbitrary synonym so… no help there. [↩]
- Amusing aside! When I first cycled it into the kegerator, I decided to skip cleaning the draft lines. Except that I’d somehow managed to forget that Evil Clone (Mk. IV) was the previous beer there so… Let’s just say that the first couple of pours were a little gingery. [↩]
- For astute reads that are following along with the footnotes, it’s worth pointing out here that I did two passes on this beer for the sensory evaluation. I poured it from the draft faucet and then, remembering that goof with the ginger mead “contamination” of the lines, poured again from a picnic tap. In other words, by the time I did the sensory evaluation, the ginger “ghosts” were largely gone. [↩]
- I’d intended to do this as 100% Saaz, but didn’t realize the AA% on those hops were lower than I’d expected until brew day. Sterling shows up as a substitute for Saaz, so I decided to sprinkle in a little bit to hit my IBU target. Gotta think on your feet sometimes. [↩]
About Rob FrieselSoftware engineer by day, science fiction writer by night. Author of The PhantomJS Cookbook and a short story in Please Do Not Remove. View all posts by Rob Friesel →
One Response to Homebrew #81: Half Dark
Pingback: Homebrew #82: Urban Owl | found drama