found drama

get oblique

Homebrew #82: Urban Owl

by Rob Friesel

Yeast harvesting and re-pitching had kind of fallen by the wayside for me over the past year or so. In 2017 through the early part of 2018, I’d tried to do quite a bit of it. The petite fiasco with Prosody (Mosaic) turned me off on that aspect of homebrewing for a while.

That being said, if you’ve got a big healthy yeast cake from a just-racked lager, then it seems a shame not to re-pitch it. So that’s just what I did here – drew up a recipe for a Munich Dunkel and called it Urban Owl:

Urban Owl

There were a couple of things motivating this particular brew. As I already stated, I knew I was going to have a big healthy colony of lager yeast. I looked up a couple of styles that could work with the 2278 Czech Pils and decided to go with a Munich Dunkel. (Mostly because it would be darker than the Czech Amber Lager that preceded it – no color contamination.)

I’d also been looking to make some lagers, and a having a Munich Dunkel on draft seemed like the perfect thing to round out this end-of-winter phase.

The recipe is one I cobbled together with inspiration from Weikert’s and the one in Strong’s Modern Homebrew Recipes. About 85% Munich malt, about 10% melanoidin, and then the rest as Victory malt with just enough Midnight Wheat ^^My closest homebrew supply doesn’t carry Weyermann malts, so my first choice (Carafa Special III) was off the table. I thought that they had Blackprinz from Briess, but either I missed it or I was mistaken because it wasn’t there. Midnight Wheat seemed an acceptable substitute, all things considered.^^^ to get the color I wanted. I would bitter to about 20 IBUs; I had a bunch of Mt. Hood on hand (a reasonable substitute for Hallertau), so I used that for the early bittering charge and then a late addition of Perle. As for the yeast… Ready and waiting:

Munich Dunkel brew day

Brew Day

Brew day got going bright and early. Did a final review of my formula, staged my gear, collected my water, weighed out the brewing salts, milled the grains… The original plan was to do this as a single infusion, with a mash-out infusion after conversion was completed.

However, after mashing in, I noted that the average temperature was 148ºF – significantly lower than the 152ºF that I expected. Thinking on my feet, I decided to turn this single infusion into a step mash. Given that I already had my mash-out infusion in the kettle, I turned the flame on and did the calculations to see what it would take to bring the main mash up to 156ºF for a second rest.

The mash rested at 148ºF for 40 minutes, finishing at about 146ºF. The second infusion went in at 180ºF, bringing the mash up to 156.4ºF. It rested for another 40 minutes before I pulled the bag. After squeezing I had about 6.7 gallons at 1.046.

Munich Dunkel brew day

I got the flame going for the boil, added 1 oz. of Mt. Hood at 60 minutes, then the 1 oz. of Perle at 5 minutes. Chilled to about 70ºF, drew off a sample for gravity, then filled my Brew Bucket and got it into the fermentation chamber to finish chilling the rest of the way. Original gravity was 1.056.

Fermentation

After a couple hours in the fermentation chamber, the thermometer was reading 52.6ºF. Satisfied with that, I pitched approximately 300 ml of 2278 slurry that I’d harvested just two days before. I decanted off the spent beer and dumped it in.

What happened next I’ll file under dumb mistakes. I checked on the fermentation at my typical intervals (about 12 hours apart) and noted to myself that even at +38 hours, I wasn’t seeing any bubbles in the blow-off bucket. I tried to reassure myself that oh hey you know lagers are just slower to start and maybe a little less vigorous but… I’d been seeing activity with Half Dark by +39 hours. I tried not to worry, but then I did when I came back at +50 and there was still nothing. So I re-checked the seals and sure enough: one of the latches on the Brew Bucket wasn’t fully engaged, meaning that the lid wasn’t all the way on. Fixed that up and saw plenty of activity 5 minutes later.

I let this fermentation ride out another couple of days and then started ramping up the temperature for the diacetyl rest. After that? Bring it back down, fine with gelatin. Final gravity 1.013 – time to keg it.

Overall Impressions

Malty and delicious and dark. Decidedly pleased with overall result.

Urban Owl

AROMA. Medium leaning strong malt character: moderate caramel and cocoa and toasted bread. None of these elements are especially strong on their own, but they have a pleasing synergistic effect. Hop contributions are a low intensity floral-over-spicy element. Clean fermentation profile – no significant diacetyl ^^Justin said there was some. “A little hint of diacetyl?” he alleged. He’s more sensitive to it than I am, so I’ll believe it – especially given that I hear Czech strains are more prone to producing it. That said, if he described it as “a little hint” and I wasn’t getting a significant amount of it then… we’ll call it good.^^^; no DMS. No significant esters. A touch of alcohol comes through on the nose, detectable just at threshold.

APPEARANCE. Dark brown color with garnet highlights; there’s a sense of depth in the glass. Khaki head with excellent retention and creamy texture. Excellent clarity, though not quite brilliant.

FLAVOR. Malt-forward – medium toasted bread crust, moderate baker’s chocolate, a light touch of caramel. Almost no hop character on the palate; some floral-over-spicy qualities, mostly retronasally. Clean lager fermentation – no significant esters, no significant diacetyl ^^Again: Justin said he got some, and it’s likely low enough that fell below my threshold.^^^; no detectable phenols, nor DMS. Firm, medium-strength bitterness. Balances toward bitterness. Off-dry finish. Aftertaste of darkly toasted bread crust.

MOUTHFEEL. Medium body. Medium carbonation. No significant astringency. Mild creaminess. No significant alcohol warming. Smooth.

OVERALL IMPRESSION. I don’t know the style well but my take is that it’s a very good example. Perhaps slightly over-bitter, and while malt has some good complexity, it’s lacking in some of the expected richness. Body also could use a little more oomph; I would argue that it’s in the right range, but lacks some of the characteristic softness and fullness. (It might also be slightly over-carbonated?) That said – flavors are good, and this beer is enjoyable to drink. There’s a solid foundation here and some tweaks could bring it into the excellent range.

I’d like to hear what some other judges say, but I think if I were to change anything for next time:

  1. A cleaner lager strain. If I recall correctly, the Czech strains are bit more prone to diacetyl production. I’d look for a cleaner one and watch its fermentation profile carefully.
  2. Add some Munich Dark. Maybe a 2:1 ratio of Munich to Munich Dark might help develop some of that malty richness that I felt was missing.
  3. Back off on the hopping a bit. I’d tried to be judicious with the Mt. Hood, but I guess my calculations were a bit off there. Maybe don’t substitute – actually use some Hallertau.

We’ll see how it does in competition.

Recipe

The all-grain (BIAB) recipe for Urban Owl is as follows:

Water Chemistry

Starting with the Champlain Water District profile as a base, carbon filter and add:

  • 0.07 g/gal. calcium chloride
  • 0.10 g/gal. calcium sulfate
  • 0.62 g/gal. baking soda
Target values in ppm
Ca Mg Na SO4²- Cl- HCO3-
33 4 52 28 26 184

Mash Grains

  • 9 lb. 8 oz. BEST Munich malt
  • 1 lb. BEST Melanoidin malt
  • 6 oz. Briess Victory malt
  • 3 oz. Briess Midnight Wheat malt

Hop Schedule

  • 1 oz. Mt. Hood (60 min.)
  • 1 oz. Perle (5 min.)

Yeast

Wyeast 2278 Czech Pils (approx. 300 ml slurry ^^Re-pitched from Half Dark.^^^)

Brew Day

  1. Collect 19.16 qt. water and heat to 163.4ºF. Mash in; hold at 152.1ºF for 75 minutes. Meanwhile heat 10 qt. water to boiling; add as a mash-out infusion. Collect 19.16 qt. water and heat to 163.4ºF. Mash in; hold at 148ºF for 40 minutes. Meanwhile heat 10 qt. water to 180ºF and add as second infusion; hold at 156.4ºF for 40 minutes. No mash out.
  2. Remove filter bag from water. Squeeze filter bag to extract as much liquid as possible for wort. No sparge. Pre-boil volume should be 6.48 gallons.
  3. Bring to a boil. Boil for 60 minutes; follow hop schedule as described above.
  4. Cool to 52ºF as rapidly as possible. Post-boil volume should be approx. 5.25 gallons.
  5. Aerate wort; pitch 2278 yeast from harvested slurry.
  6. Start fermentation at 52±2ºF.

Beyond Brew Day

  1. Starting at 52±2ºF, allow fermentation to continue until approximately 50% of expected attenuation has completed.
  2. Ramp up temperature +5ºF every 12 hours until reaching 68±2ºF for a diacetyl rest. Hold there until reaching F.G., at least three days.
  3. Bring down temperature -5ºF every 12 hours until reaching 35±2ºF. Optionally fine with gelatin under 40ºF.
  4. Rack to a keg and force carbonate to approx. 2.5 vols (12-13 PSI should do it).
  5. Consider lagering 5-7 days per 2ºP (35-49 days); or go ahead and drink it if it’s looking and tasting fine.
  6. Enjoy!

Details

Urban Owl, a Munich Dunkel by Tilde Gravitywerks

Original Gravity 1.056
Final Gravity 1.013
ABV 5.6%
Attenuation 75.5%
IBU 19
SRM 21
Links Flickr

    About Rob Friesel

    Software engineer by day. Science fiction writer by night. Weekend homebrewer, beer educator at Black Flannel, and Certified Cicerone. Author of The PhantomJS Cookbook and a short story in Please Do Not Remove. View all posts by Rob Friesel →

    3 Responses to Homebrew #82: Urban Owl

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    *

    *